Packaging Inspection Equipment for PP Plastic Disposable Food Containers
| System Operating Parameters |
| Syste Size | System Operating Parameters | Voltage And Current | 220V 20A 50Hz |
| Power | 5.0-6.0kw | Compressed Air | Clean And Oil-Free |
| Ambient Temperature | -20℃ ~ 60℃ | Environment Humidity | Below 50% Relative Humidity |
The Testing Standards Are As Follows:
| Model | Camera | Detecton Range | Detection Content And Accuracy | Accuracy | Speed |
| Kvis | 1 Set | Mouth Plane, Inner Wall Area | Black Spots, Stains | 99% | 150-300pcs/min |
| Black Spots, Stains | 99% |
| Gap, Flash | 99% |
| 8 Sets | The Outer Side | Black Spot Stains | 99% |
| Label Misplacement, Stamping, Damage | 99% |
| 1 Set | Outer Bottom | Black Spots, Stains | 99% |
Inspection details
- Our company uses five sets of industrial cameras to test the product according to the needs of product characteristics and testing content; each camera corresponds to an inner side of the product;
- Because of the detection of holes in this inspection project, our company chooses the backlight light source for the optical system.
- Compatible with products of different specifications according to the actual situation on site
- Pneumatic rejection of unqualified products, and the count of defective products can be realized;
- All conveying parts of our products will use vacuum negative pressure belts to ensure that the products running at high speed will not deviate and fall.
Conveyor design
According to the situation of the on-site equipment and the consideration of the on-site space, our company will replace the belt conveyor in the host with our belt equipment (the conveyor mechanism composed of three flexible chain plates with the same width as the on-site belt), on the equipment Our company will combine the original 3*3 or 3*4 form of incoming materials into 1*1 incoming materials by means of blocking and speed difference, and enter the testing equipment, so that our testing equipment can conduct testing, the middle belt first, both sides The way the belts converge towards the middle. As shown in the figure below:
After-sale service
The company has a complete technical service team and rapid response mechanism, and has dedicated service specialists for each customer, who can receive technical consultation and fault reports from customers at any time. And to ensure rapid response to customer emergencies, to ensure that customers receive satisfactory service.During the epidemic or due to special reasons, when after-sales engineers are unable to reach the site, the service center can remotely adjust customer equipment for troubleshooting and technical consultation.
After the equipment arrives at the customer site, the after-sales engineer arrives in time to carry out equipment installation, commissioning, and operation training. The product quality of the whole machine is traceable, and the quality warranty period is 1 year from the date of acceptance. In the event of non-human faults during the warranty period, after-sales engineers will quickly arrive at the site or provide remote guidance for free maintenance.
Product Tags:
|
|
Packaging Inspection Equipment For PP Plastic Disposable Food Containers Images
|
